Soil survey area

Seneca County, Ohio

Survey Area OH147• Ohio
The short version

The most common soil here is Blount, on about 30% of the land: a silt loam, smooth, like flour. Hoytville and Glynwood come next.

About 8% of the land drains well, and 84% stays wet for long stretches; groundwater comes within two feet of the surface under 88% of it.

USDA rates 99% of the land very limited for a standard septic drain field, and 94% very limited for homes with basements. That means extra cost or special design, not that it can't be done.

Worth knowing: 4% of the land floods occasionally or more, and bedrock lies within 40 inches under 4% of it.

Soils change over short distances, so look up an address below for the soil at that exact spot and the reasons behind each rating.

The ground underfoot

The soils you're most likely standing on

The biggest named soils in Seneca County, Ohio, each drawn five feet deep from its official USDA description, in its recorded colors.

Blount
30% of the area
Silt loam topsoil · somewhat poorly drained
Smooth, like flour. Fertile and holds water well.
Alfisols
Hoytville
10% of the area
Clay loam topsoil · very poorly drained
Firm and a little sticky. Holds water and nutrients well.
Alfisols
Glynwood
7% of the area
Silt loam topsoil · moderately well drained
Smooth, like flour. Fertile and holds water well.
Alfisols
Pandora
7% of the area
Silt loam topsoil · poorly drained
Smooth, like flour. Fertile and holds water well.
Alfisols
Tiro
6% of the area
Silt loam topsoil · somewhat poorly drained
Smooth, like flour. Fertile and holds water well.
Alfisols
Nappanee
4% of the area
Clay loam topsoil · somewhat poorly drained
Firm and a little sticky. Holds water and nutrients well.
Alfisols

Dots mark gravel; white flecks mark lime. Shares are by acres across the survey area, and each mapped patch usually mixes several of these soils.

The biggest mapped areas

The dominant drainage class is Somewhat poorly drained and the dominant hydrologic group is D (very slow infiltration, high runoff). The most common soil order is Alfisols — moderately leached forest soils with a clay-enriched subsoil. This report summarizes the major soil map units across the survey area to help you understand what to expect when buying, building, or gardening in Seneca County, Ohio. Search your address to find the exact soil composition, drainage, and series details at your specific location.

Soil Map UnitAcresDrainageHydro GroupDwellingsSeptic
Blount silt loam, ground moraine, 0 to 2 percent slopes 42K Somewhat poorly drainedDVery limitedVery limited
Hoytville silty clay loam, 0 to 1 percent slopes 35K Very poorly drainedC/DVery limitedVery limited
Blount silt loam, end moraine, 0 to 2 percent slopes 28K Somewhat poorly drainedDVery limitedVery limited
Blount silt loam, ground moraine, 2 to 4 percent slopes 28K Somewhat poorly drainedDVery limitedVery limited
Pandora silt loam, 0 to 2 percent slopes 26K Poorly drainedC/DVery limitedVery limited
Blount silt loam, end moraine, 2 to 4 percent slopes 26K Somewhat poorly drainedDVery limitedVery limited
Tiro silt loam, 0 to 2 percent slopes 20K Somewhat poorly drainedC/DVery limitedVery limited
Nappanee silt loam, 0 to 2 percent slopes 11K Somewhat poorly drainedDVery limitedVery limited
Kibbie fine sandy loam, 0 to 2 percent slopes 10K Somewhat poorly drainedB/DVery limitedVery limited
Digby loam, 1 to 4 percent slopes 10K Somewhat poorly drainedB/DVery limitedVery limited
Colwood silt loam 8K Very poorly drainedB/DVery limitedVery limited
Tiro silt loam, 2 to 6 percent slopes 7K Somewhat poorly drainedC/DVery limitedVery limited
Lenawee silty clay loam 6K Very poorly drainedC/DVery limitedVery limited
Haskins loam, 0 to 2 percent slopes 6K Somewhat poorly drainedC/DVery limitedVery limited
Chagrin silt loam, occasionally flooded 5K Well drainedBVery limitedVery limited
Shoals silt loam, 0 to 2 percent slopes, frequently flooded 5K Somewhat poorly drainedB/DVery limitedVery limited
Haskins loam, 2 to 6 percent slopes 5K Somewhat poorly drainedC/DVery limitedVery limited
Glynwood silt loam, ground moraine, 2 to 6 percent slopes 4K Moderately well drainedDVery limitedVery limited
Gallman loam, 2 to 6 percent slopes 4K Well drainedANot limitedVery limited
Glynwood clay loam, end moraine, 2 to 6 percent slopes, eroded 4K Moderately well drainedDVery limitedVery limited

Soil Orders in This Area

The USDA classifies every soil into one of 12 soil orders. Here are the dominant orders found in this survey area.

Alfisols
Moderately weathered forest soils with clay-enriched subsoil. Productive for agriculture, generally good for building and septic.
Mollisols
Fertile grassland soils with thick, dark topsoil. Among the best for agriculture, building, and gardening.

What This Means

Building & Foundations

About 94% of soils are rated "very limited" for dwellings with basements. Specific challenges include poor drainage in some areas, flood-prone areas. A geotechnical assessment is recommended before building.

Septic Systems

About 99% of soils are rated "very limited" for septic absorption fields. Poorly drained soils can't absorb septic effluent effectively. Engineered or alternative systems are frequently required. Always get a professional perc test before purchasing land that needs septic.

Gardening & Agriculture

Many soils hold water for extended periods. Raised beds are highly recommended to improve drainage for vegetables. Well-adapted native plants and water-loving species will do best in natural conditions.

Look Up a Specific Address

📍